How to Apply a Fiberglass Jointing Tape to a Substrate?

 

Fiberglass jointing tapes are assumed as a wonderful tool for patching holes present on drywall or any of the paper substitutes. For sure one must be eager to known the tips that how to apply this tape to gain the perfect result.  Fiberglass tapes are easily available with any plastering supplies in Australia and even easy to use. It is a worthy deal in terms of costing and performance if, one is handling bigger projects and need to come up sooner with it. Remember always make use of a package that indicates self-adhesion to gain a pleasant experience. Make use of tape dispenser to get the finished look for flat seam and corners inside the house. Below is the entire detail of how to make use of this amazing product:

Filling of gaps:

In case the drywall is having a hole or crack that is about 1/4^th inches deep then, it is necessary to fill the gap with the use of some substrate. This substrate can be either an all-purpose ready-mixed compound or a setting-type compound.  The variation amongst the two is based upon its drying time. The best choice in this range is the setting-type compound as it doesn't consume longer hours for drying.

Repair the walls:

It is considered that the careless handling during the phase of installation causes tearing of paper which results in exposure of gypsum core. So, it is required that the cracked area needs to be covered with fiberglass jointing tapes from edge to edge and later coat the tape with the use of setting compound to get the best result in a short time.

Application of fiberglass jointing tapes:

Making use of fiberglass jointing tapes is considered to be of greater ease. Place the tape in the center of the drywall seam and firmly press it down to avoid any issue. To protect the finger from cut try to purchase glove. Later, cut the tape with the use of the sharp knife and apply the tape into the seam.

What else to remember?

Thus, after applying fiberglass jointing tapes one needs to proceed with the task of edge sealing and embedding of tapes with the use of quickly setting compound to get the finished look. This is a unique derivative of plastering supplies in Australia to add more holding strength to the substrate.